This Dye made of Iron is best suited for 120 mm Heat Sink Plate used for 40 / 50 Watts LED Bulbs/Dome Lights.
120 MM Bulb Tikki pressing DYE
Previous product
50 Watt LED Bulb Raw Material
₹280.00 ₹365.00
Next product
9 Watt LED bulb RC Driver
₹11.00 ₹14.00
₹1,900.00
In Stock
Highlight
This Dye made of Iron is best suited for 120 mm Heat Sink Plate used for 40 / 50 Watts LED Bulbs/Dome Lights.
Estimated Delivery:
16 November - 18 November
- Cash On Delivery
- Best Quality
- Secure payment
Additional information
| Weight | 199 g |
|---|---|
| Dimensions | 17 × 10 × 10 cm |
| Brand | TOPSOIL LED |
Reviews (0)
Add a review
Currently, we are not accepting new reviews
Q & A
Q & A
Ask a question
There are no questions yet
Related products
Screw driver for led bulb
Rated 3.80 out of 5
(5)
Highlight
Screw driver for led bulb (1 Piece)
This a 2 in 1 Screw driver
A screwdriver with a plastic handle and a steel shaft used for screwing and unscrewing the small screws of the LED Bulbs or any other applications.
It is oval in cross-section with improved grip and prevent the tool from rolling when set down. This manual screwdriver has interchangeable tips that fit into a socket on the end of the shaft and are held in mechanically. It has a hollow handle that contains the tips of both the sides with a reversible action that allows multiple full turns without repositioning the tip.
₹70.00
Out Of Stock
30 Watt Soldering Iron Bit high quality
Rated 0 out of 5
(0)
Highlight
30 Watt Soldering Iron Bit (High Quality)
₹60.00
Out Of Stock
Solder Wire
Rated 4.54 out of 5
(41)
Highlight
60-40 Soldering Wire 250 Grams High Quality .
Wire Diameter : 0.8 mm
Applications : Manual Soldering of all electronic Applications. Use 25 W soldering iron for best result you can also use robot soldering and it is Rosin flux core .
Good soldering effect
No splashing of rosin when soldering.
Surface of welding spot is smooth and bright.
During soldering smoke less and odorless smell.
₹399.00
Out Of Stock
Heat Sink Paste / Compound
Rated 4.61 out of 5
(51)
Highlight
Heat Sink Paste / Compound
Heat Sink Paste / Compound used to promote better heat conduction between MCPCB and heat sink plate.
₹220.00
Out Of Stock
Wirecutter
Rated 3.00 out of 5
(2)
Highlight
This is portable easy operation hand tool Cutter for cutting copper, aluminum, Iron wires easily. Some times we get stuck while fitting wires, small cuttings of wire in Home, Office, Factory but this is the best solution that allows you wire cutting with easy hand operation.
₹70.00
Out Of Stock
Soldering Iron Bit 12W to 15W high quality
Rated 4.00 out of 5
(3)
Highlight
Soldering Iron Bit 12W to 15W high quality
₹50.00
SaleOut Of Stock
LED Bulb Punching Machine
Rated 4.00 out of 5
(11)
Highlight
LED Bulb Punching Machine
Color : Golden
Machine Material : METAL
Model Name Pin : 12 PIN
Ideal for : B22 and E27 bulb
₹1,199.00 ₹2,499.00
Out Of Stock
Soldering Iron 30 Watt
Rated 4.38 out of 5
(13)
Highlight
Soldering Iron 30 Watt
30 Watts Soldering Iron is the one best used for electrical and electronics work mainly used in soldering the electronic parts in repairing / assembling the LED Bulbs MCPCB, Drivers, b-22 caps, electronic components etc.
This Soldering Iron is composed of a heated metal tip with an insulated handle, and has a technically advanced cartridge type heating element, attains working temperature quickly with low leakage current and constant tip temperature. It has specially coated long life soldering bits, applicable for a wide range of soldering applications.
₹220.00
SaleOut Of Stock
Tikki Fitting Machine
Rated 4.00 out of 5
(4)
Highlight
Led Bulb Tikki Fitting Machine’ used for assembling led bulbs, is a heavy quality with the weight approx. 10-11 kgs. This is a manual machine with two fixtures for led bulb set of two base and bulb fixtures which can assemble bulbs from 3 watts to 18 watts.
₹1,700.00 ₹6,999.00
Out Of Stock
LED MCPCB Repairing Machine
Rated 5.00 out of 5
(4)
Highlight
LED MCPCB Repairing Machine used for repair led bulb mcpcb, Flood light MCPCB, Street light MCPCB.
Watt : 800
AC Input : 230V
₹4,500.00
Recently Viewed
Sale
120Watt LED Flood Light Driver & MCPCB
Rated 4.00 out of 5
(1)
Highlight
120Watt LED Flood Light MCPCB Color Cool White
Brand : TOPSOIL LED
Watt : 120
Total Number of LED : 120
Colour : Cool White,
Colour Temperature : 6500K
PCB Type : Single Sided
PCB Size : 200x 140 mm
PCB Material : MCPCB
PCB Thickness : 1.6mm
Copper Thickness : 35µ
Driver 1500 mA
Lumens : 130 to 140 per watt
₹470.00 ₹2,900.00
Out Of Stock
Heat Sink Paste / Compound
Rated 4.61 out of 5
(51)
Highlight
Heat Sink Paste / Compound
Heat Sink Paste / Compound used to promote better heat conduction between MCPCB and heat sink plate.
₹220.00
SaleOut Of Stock
Rechargeable LED Torch 12W Power Backup 10 hours
Rated 4.67 out of 5
(3)
Highlight
- Rechargeable Torch
- Rechargeable Lithium Battery 1200 mAh
- Charging Time 5 to 7 hours
- Power Backup up to 10 Hours
- 2 in 1 Torch
- Can Be Used In Bad Weather Such As Power Outages, Storms
- Three Different Modes: High, Low & Back Light.
- Good Choice For Home Emergency Situation
₹110.00 ₹199.00
SaleOut Of Stock
Metal Oxide Varistor (MOV) 07D621K Pack of 1000
Rated 0 out of 5
(0)
Highlight
Electronics Circuits protects from high voltage fluctuation .This component is used to protect electrical devices from high transient voltages. They are planted in the devices in such a manner that it will short itself when a high current is produced due to the high voltage. Thus the current dependent components in the device will remain safe from the sudden surge.
MOV 07D621K
Pack of 1000
Part No : 07D621K
DIA : 07
VAC : 385
RoHS Compliant
₹1,500.00 ₹2,499.00
SaleOut Of Stock
Metal Oxide Varistor (MOV) 07D561K Pack of 1000
Rated 0 out of 5
(0)
Highlight
Electronics Circuits protects from high voltage fluctuation .This component is used to protect electrical devices from high transient voltages. They are planted in the devices in such a manner that it will short itself when a high current is produced due to the high voltage. Thus the current dependent components in the device will remain safe from the sudden surge.
MOV 07D561K
Pack of 1000
Part No : 07D561
DIA : 07
VAC : 350
V1m(V) : 560
VDC : 460
RoHS Compliant
₹1,500.00 ₹2,499.00
SaleOut Of Stock
₹199.00 ₹299.00
SaleOut Of Stock
Solar Rechargeable Emergency Lights
Rated 0 out of 5
(0)
Highlight
- Pack of 1
- Solar Rechargeable lamp
- Backup in High mode -2 to 3 Hours
- Backup in low mode -4 to 5 Hours
- Battery 1500 mAh
₹299.00 ₹499.00
Sale
100 Watt LED Flood Light MCPCB Color Cool White Size 150×103 mm
Rated 0 out of 5
(0)
Highlight
100 Watt LED Flood Light MCPCB Color Cool White
Brand : TOPSOIL LED
Watt : 100
Total Number of LED : 100
Power Required : 1200 to 1500 mA
Colour : Cool White,
Colour Temperature : 6500K
PCB Type : Single Sided
PCB Size : 150×103 mm
PCB Material : MCPCB
PCB Thickness : 1.6mm
Copper Thickness : 35µ
Pack of : 1
Lumens : 155 to 165 per watt
₹130.00 ₹299.00
Sale
SMD LED 1 watt 18V 60ma warm white pack of 500
Rated 4.75 out of 5
(4)
Highlight
Brand Name: Edison
Type: LED
Condition: New
Model Number: warm white 2835 SMD LED 1W 18V 60ma
Package Type: Surface Mount
₹400.00 ₹699.00
Sale
CBB 100nF-630V
Rated 4.60 out of 5
(5)
Highlight
CBB 100nF-630V
| Capacitor number | 104J |
| Value in nf | 100nf |
| Value in uf | 0.1uf |
| model | 104j 630v |
| Terminal | 2 |
| Terminal type | through holes |
₹2.00 ₹3.00
Sale
SMD LED 1 watt 18V 60ma Cool white pack of 500
Rated 4.40 out of 5
(5)
Highlight
Brand Name: Edison
Type: LED
Condition: New
Model Number: Cool white 2835 SMD LED 1W 18V 60ma
Package Type: Surface Mount
₹400.00 ₹699.00
SaleOut Of Stock
PF Capacitor 155J 450V
Rated 4.86 out of 5
(22)
Highlight
155J 450V Polyester Capacitor film capacitor (High Quality )
- Tolerance : + 5%
- Model : 155J 450V
₹4.00 ₹5.50
SaleOut Of Stock
PF Capacitor 125J 450V
Rated 4.60 out of 5
(15)
Highlight
125J 450V Polyester Capacitor film capacitor (High Quality )
P= 15MM
₹3.50 ₹5.00
Sale
30 Watt LED Bulb Driver and MCPCB
Rated 4.71 out of 5
(24)
Highlight
TopSoil 30 Watt LED Bulb Driver and MCPCB.
This pack contains TopSoil 30 Watt LED Bulb Driver and MCPCB . Driver has a stand-by up to AC 440V.
Wattage : 30 watts
Operating Voltage : AC 80 to 440 volt
PF : 0.95
Driver Type : IC HPF
Lumens : 140 to 145 per watt
Colour : Cool Day Light
Colour Temp. : 6500K
₹100.00 ₹145.00
Sale
120 Watt Flood Light Color Cool White With Brand Name & Plain box
Rated 0 out of 5
(0)
Highlight
This pack contains 120 Watt Flood Light Color Cool White With Brand Name & Plain box 2 Year warranty
Body : Aluminium
Waterproof : Yes
Weight : 2 KG
Surge :6kV surge pass
Wattage : 120w
Input Voltage : AC 80 to 300 volt
Lumens : 145/Watt
frequency : 50-60Hz
PF : 0.95
Driver Type : IC HPF
₹1,150.00 ₹4,999.00
Reviews
There are no reviews yet